Whether you fabricate via a laser, a plasma table, a waterjet or you cut sheet goods on a router table, Fusion 360 is here to help your business reach its goals. Laying out your design for fabrication takes valuable time away from your day. A bad layout also costs you money because of wasted material. These problems are made worse when you realize that your design requires an update and you’ll need to start the process over again. Fusion 360 solves all of these problems with automated nesting, available via the Nesting & Fabrication Extension.
In this 15 minute webinar, Autodesk’s Spencer Hardcastle will show you how automated nesting will radically improve your fabrication workflow. You’ll also learn the best way to test out our nesting features to see if upgrading to the Fusion 360 Nesting & Fabrication Extension makes sense for your business.
If you’re interested in increasing your efficiency and reducing your costs, this webinar is for you.
►FREE TRIAL | https://autode.sk/31Sxeef
►SUBSCRIBE | https://autode.sk/30njGGX
►GET STARTED | https://autode.sk/30k2DWh
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P
FACEBOOK | http://autode.sk/19jII5A
TWITTER | http://autode.sk/19jIJXc
LISTEN to the Fusion 360 podcast "The New Possible":
BLOG | http://autode.sk/3qbFsFS
SPOTIFY | http://autode.sk/3txPz9O
APPLE | http://autode.sk/36LwBTE
GOOGLE | http://autode.sk/2YQccbC
0:00 Intro and Agenda
1:32 About the Presenter
2:12 Why Do Extensions Exist?
4:07 About the Fusion 360 Nesting & Fabrication Extension
11:22 Nesting in Action
22:22 Getting Access to the Nesting & Fabrication Extension
26:56 Closing Remarks
Powered by WPeMatico