December 9, 2019

The 12 Projects of Christmas | Day 8 | Ornamental Box with Todd | Vectric In The Labs

If you are like my Family, we have several Christmas Tree Ornaments that have been in our Family’s history for more than one or two generations. Every year, when the decoration boxes are opened, it is always hard to see one of them broken beyond repair. Thanks to this special project next year there will be less of a chance one of our cherished ornament will be lost.
This project starts off in VCarve Pro with the Box Creator Gadget and then is modified to me a 4 sectioned box with VCarving. Don’t panic if you only have the Desktop version of your software and don’t have access to gadgets. We have provided the file I used and one that makes use of .25” thick stock and a .25” Endmill that should fit most needs.
I hope you enjoy this project and even if you don’t need a safe place for your Christmas ornaments this box would make a great memories box with a quick change of the VCarving!

Enjoy and have a very Merry Christmas!

IMPORTANT: Before outputting any toolpaths you should carefully check all part sizes and the material setup to make sure they are appropriate for your actual setup. You should also check and re-calculate all toolpaths with safe and appropriate settings for your material, CNC machine and tooling.

To download the FREE project:

#Vectric #FreeCNCProjects #CNCChristmasProjects #CNC #IntheLabs #Aspire #VCarve #Cut2D #ChristmasCNCProject #OrnamentalBoxCNC #FreeCNCProject #BoxCNC #WoodenBox

Subscribe to Vectric on YouTube:

See more Vectric Free Monthly Projects:

Vectric on Facebook:

Vectric on Instagram:

Vectric on Twitter:

Powered by WPeMatico

linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram