hqdefault 7
Get Started with CAD/CAM Tutorial: Making Your First CAM Document | Autodesk Fusion 360

In this Get Started with CAD/CAM Autodesk Fusion 360 YouTube series, Manufacturing Product Director Al Whatmough walks you through CAD/CAM in Fusion 360. From a workspace overview to post processing, this series sets you up for success even if you’re early in your CAD/CAM software journey.

In this third video, Al walks through how to create a manufacturing assembly, how to create a manufacturing setup, and creating your first toolpath in Fusion 360.

00:00 – Creating a Manufacturing Assembly
06:48 – Creating a Manufacturing Setup
10:04 – Creating Your First Toolpath

►FREE TRIAL | https://autode.sk/31Sxeef
►SUBSCRIBE | https://autode.sk/30njGGX
►GET STARTED | https://autode.sk/30k2DWh
►TRY AN EXTENSION | https://autode.sk/3EOUidW

CONNECT with Fusion 360 on social media:

INSTAGRAM | https://autode.sk/2Enzh8P
FACEBOOK | http://autode.sk/19jII5A
TWITTER | http://autode.sk/19jIJXc
LINKEDIN | https://autode.sk/3UyieZS

Powered by WPeMatico

x Logo: Shield Security
This Site Is Protected By
Shield Security