November 20, 2019
The Tronxy D01 has been UPDATED! Here's what happened.

After my video, Tronxy has taken action in updating firmware for ALL their 3D Printers to enable Thermal Runaway Protection. In this video I'll describe how to update your machine to the safer firmware, as well as some more information on the Tronxy D01 3D Printer which was left out of the review. The original […]

Read More
November 18, 2019
Was live: First print on the Prusa SL1 & trying the CW1!

Let's give the Prusa SL1 and the CW1 a go! I've got high expectations for Prusa's first resin printer - and for the first SLA printer that comes with a dedicated curing and washing station. Get the SL1 and CW1: http://go.toms3d.org/SL1 💝 Live tips here! http://go.toms3d.org/live-tips 💙 Buying items through my affiliate links gives the […]

Read More
November 17, 2019
Was live: Prusa SL1 build!

Let's give the Prusa SL1 and the CW1 a go! I've got high expectations for Prusa's first resin printer - and for the first SLA printer that comes with a dedicated curing and washing station. Get the SL1 and CW1: http://go.toms3d.org/SL1 💝 Live tips here! http://go.toms3d.org/live-tips 💙 Buying items through my affiliate links gives the […]

Read More
November 14, 2019
Can the CR-10 V2 topple the Creality King? 3D Printer Review

The CR-10 was the hottest 3D Printer of 2017, but does the Creality CR-10 V2 have what it takes to become a worthy successor? Purchase Links: Direct - https://www.creality3dofficial.com/ Gearbest - https://www.gearbest.com/3d-printers--3d-printer-kits/pp_009904361997.html?wid=1349303&lkid=72403595 Amazon - https://amzn.to/33Jt3O2 Models Shown: Gayer-Anderson Cat - https://www.myminifactory.com/object/3d-print-gayer-anderson-cat-at-the-british-museum-london-4010 Openforge 2.0 Cave Entrance - https://www.thingiverse.com/thing:3835399 Clearance Test - https://makersmuse.podia.com/clearance-and-tolerance-3d-printer-gauge Support Maker's Muse on […]

Read More
November 13, 2019
The Tronxy D01 is a Solid CoreXY, Linear Rail 3D Printer... BUT

The Tronxy D01, with a few slicer tweaks, can produce great prints and has a solid design. However, I was saddened to discover that Thermal Runaway protection is not enabled and did encounter a potentially catastrophic event while finishing up my tests. Here on Maker's Muse I take safety very seriously, and link the machine […]

Read More
November 13, 2019
Upgrading the MK3 with genuine HIWIN linear rails: Worth it?

The MK3 is a really easy platform to upgrade - but does it need a 200€ HIWIN linear rail kit? Click https://skl.sh/tomsanladerer7  to get 2 months of Skillshare for FREE!  Linear Rail Kit from Watterott: https://shop.watterott.com/Y-axis-upgrade-kit-for-Prusa-MK3 Prusa MK3: http://toms3d.org/MK3Kit Happy planter models by Flowalistik https://www.prusaprinters.org/prints/570-happy-planter-collection 💙 Buying items through my affiliate links gives the channel a […]

Read More
November 8, 2019
Makeblock Laserbox Review - A SMART CO2 Laser Cutter

The Laserbox adds 40W of laser cutting potential to your creative projects, but is it the right tool for you? Purchase Information: Makeblock Laserbox product page: http://bit.ly/laserboxmakersmuse Laserbox Price Quotes: http://bit.ly/2rl7DbL More on the Laserbox automatic "bring sketch to life" feature - https://www.youtube.com/watch?v=6sQpW0KU2go Support Maker's Muse on Patreon https://www.patreon.com/makersmuse?ty=h 50 3D Printing Tips and Tricks […]

Read More
November 5, 2019
Elegoo Mars MSLA 3D Printer Review

The Elegoo Mars makes high detail resin 3D Printing affordable, but is it worth the effort? Purchase Links: Elegoo Mars (amazon) - https://amzn.to/2Nc49kc Elegoo Mars Pro (coming soon) Support Maker's Muse on Patreon https://www.patreon.com/makersmuse?ty=h Models shown: Christmas Tree Lattice - https://gumroad.com/l/bxtXO 3D Benchy - https://www.thingiverse.com/thing:763622 Gayer-Anderson Cat - https://www.myminifactory.com/object/3d-print-gayer-anderson-cat-at-the-british-museum-london-4010 Barbarian Girl 2 - https://www.thingiverse.com/thing:3852787 Fallout […]

Read More
November 5, 2019
ATX supplies are super useful for 3D printers!

Why have we stopped using ATX computer power supplies? I explain what the pros and cons are of going with an simple "industrial" power supply vs. a full ATX supply, including being able to shut it down through the firmware yet still getting a solid 5V supply for a Raspberry Pi! 24V 10A supplies http://go.toms3d.org/24v10a […]

Read More
October 31, 2019
Resin 3D Printer Purchase Primer - Start Here!

Thinking about buying a Resin 3D Printer to print incredibly detailed models? There is a lot you need to know first! Resin 3D Printers are very different to FDM/FFF 3D Printers. This video is intended to give newcomers a background on the safety considerations around resin 3D Printers, and what to look out for when […]

Read More
October 30, 2019
3D Printer with luggage handle and underwater theme slicer? QIDI TECH X-Maker Review

3 years ago I reviewed the QIDI TECH X-One and I loved its robust design and reliable print quality, but can the X-Maker win me over in 2019? Watch to find out. Purchase Links: Aliexpress - https://www.aliexpress.com/item/4000070551794.html Amazon - https://amzn.to/2Nj0uA1 Gearbest - https://www.gearbest.com/3d-printers--3d-printer-kits/pp_3006826325249775.html?lkid=68796182 Support Maker's Muse on Patreon https://www.patreon.com/makersmuse?ty=h 50 3D Printing Tips and Tricks […]

Read More
October 28, 2019
You can make this 3D-printed, Arduino-powered IR thermometer yourself

If you want to measure the temperature of an object, one very convenient way is to use an infrared thermometer. MN Maker didn’t have one, and after wondering just how hot a component was getting, he decided to simply build one. His device utilizes an Arduino Nano for control, and resides inside a 3D-printed enclosure […]

Read More
October 28, 2019
Get started with machine learning on Arduino

This post was originally published by Sandeep Mistry and Dominic Pajak on the TensorFlow blog. Arduino is on a mission to make machine learning simple enough for anyone to use. We’ve been working with the TensorFlow Lite team over the past few months and are excited to show you what we’ve been up to together: […]

Read More
October 28, 2019
Is resin 3D printing worth it? (Elegoo Mars Review)

The Elegoo Mars is a nice resin 3D printer - but is resin 3D printing nice? 🤷‍♂️ Go to https://NordVPN.com/tomsanladerer to get 70% off a 3-year plan and use code tomsanladerer to get an additional month for free! Get the Elegoo Mars http://go.toms3d.org/ElegooMars If it's out of stock, try some other countries Amazon Spain http://go.toms3d.org/ElegooMarsButFromSpain […]

Read More
October 28, 2019
Meet David Cuartielles, Arduino co-founder with a passion for education

Since very early on I developed an interest in education. During my studies I worked as afterschool teacher in math, physics, chemistry, and languages. Shortly after graduating from my MSc in Engineering I became a teacher at the School of Arts and Communication at Malmo University, Sweden. For over a decade I worked in the […]

Read More
October 28, 2019
Getting Started with EAGLE Part 2

If you're new to EAGLE or a #PCBdesign beginner this is the perfect place to start your journey. This is a 2-Part Series. See Part 1 here https://youtu.be/j79RRCUsD2c Download EAGLE https://autode.sk/2CyktqH ►GET STARTED https://autode.sk/2DWUHgC FREE TRIAL | https://autode.sk/2T1920C SUBSCRIBE | https://autode.sk/2DWeb4W CONNECT WITH US: INSTAGRAM | http://bit.ly/2Xz4MaV FACEBOOK | http://bit.ly/2EKy7I3 TWITTER | http://bit.ly/2SHAq23 Powered by […]

Read More
October 28, 2019
Creating PCB Enclosures with EAGLE and Fusion 360 - Part 3

Please see Creating PCB Enclosures with EAGLE and Fusion 360 (Part 1) http://bit.ly/2NJBWC3 and (Part2) http://bit.ly/2mVUO5T (Part 3) http://bit.ly/2pohyML Part 3 - In this next stage of our enclosure series you'll learn how to fasten the board to the enclosure and the first stages for the lid. Get the ECAD-MCAD duo https://autode.sk/2FRaQqp ►GET STARTED https://autode.sk/2DWUHgC […]

Read More
October 28, 2019
The Arduino Audio Meter is a programmable ‘guitar pedal’

Normally guitar pedals take in a signal from your instrument, then some modification to an amplifier. ElectroSmash’s open source device, however, looks like a guitar pedal, connects to a guitar and amp like a guitar pedal, but actually leaves the signal unmodified. Instead, it displays a variety of info about what you’re playing on its 16 x 16 […]

Read More
October 28, 2019
Getting Started with EAGLE Part 1 - OCT 2019

If you're new to EAGLE or a #PCBdesign beginner this is the perfect place to start your journey. Download EAGLE https://autode.sk/2CyktqH ►GET STARTED https://autode.sk/2DWUHgC FREE TRIAL | https://autode.sk/2T1920C SUBSCRIBE | https://autode.sk/2DWeb4W CONNECT WITH US: INSTAGRAM | http://bit.ly/2Xz4MaV FACEBOOK | http://bit.ly/2EKy7I3 TWITTER | http://bit.ly/2SHAq23 Powered by WPeMatico

Read More
October 28, 2019
PCB Design Thermal Analysis - Autodesk EAGLE - Fusion 360

James Youmatz and Jorge Garcia on teach you how to set up configurations and evaluate thermal performance of rapidly prototyped electronics using Autodesk EAGLE and Fusion 360. Download EAGLE https://autode.sk/2CyktqH ►GET STARTED https://autode.sk/2DWUHgC FREE TRIAL | https://autode.sk/2T1920C SUBSCRIBE | https://autode.sk/2DWeb4W CONNECT WITH US: INSTAGRAM | http://bit.ly/2Xz4MaV FACEBOOK | http://bit.ly/2EKy7I3 TWITTER | http://bit.ly/2SHAq23 Powered by WPeMatico

Read More
October 28, 2019
#PCBDesign Signal Quality Series Part 3: Transmission Lines Principles

Signal Quality Series Part 3: Transmission Lines Principles Download EAGLE https://autode.sk/2CyktqH ►GET STARTED https://autode.sk/2DWUHgC FREE TRIAL | https://autode.sk/2T1920C SUBSCRIBE | https://autode.sk/2DWeb4W CONNECT WITH US: INSTAGRAM | http://bit.ly/2Xz4MaV FACEBOOK | http://bit.ly/2EKy7I3 TWITTER | http://bit.ly/2SHAq23 Powered by WPeMatico

Read More
October 28, 2019
New Arduino Pro IDE: A closer look

Last weekend we announced that we’re working on the new Arduino Pro IDE and we got a huge response! Let’s take a deeper look at what is in store. Here are the choices you have to develop code from Arduino today — some you might know, others you might not — and how they paved […]

Read More
October 28, 2019
3D Printed Resin Clean Tray with Infill Mesh!

Create complex, hollow objects easily using shell in Fusion 360, and learn how to create a mesh in your 3D Prints for all kinds of uses! I used it to create a cleaning tray for my resin 3D Printers. TIMESTAMPS: 2:09 Overview of design in Fusion 360. 6:12 How to use the shell tool 9:30 […]

Read More
September 25, 2019
Gigantic game of Operation powered by Arduino

As a kid you may have played Operation, but certainly never anything like this nine-foot-tall version from SPOT Technology. This device is not only impressively large, but assists doctors in their surgical pursuits with a CNC gantry setup to pull out obstructions. In the game, amateur surgeons control the system using a small arcade cabinet next […]

Read More
September 24, 2019
30 EAGLE QUICK TIPS in 30 MINUTES

Rapid fire 30 EAGLE TIPS in 30 MINUTES with ED and Jorge! Powered by WPeMatico

Read More
September 24, 2019
Signal Quality Part 2: Physical Basis of Inductance and Capacitance

Check out Signal Quality Part 2 webinar series. Learn how Inductance and Capacitance along with Impedance tie in together so you make sound engineering choices then next time you route a high-speed #PCBDesignTools #Autodesk Powered by WPeMatico

Read More
September 24, 2019
Finally cheap* Direct Metal 3D Printing - from One Click Metal!

Let's 3D print... with metals! There are a ton of options available now for producing 3D metal parts, but the most straightforward one involves laser-welding pulverized stainless steel directly into your final shape. No de-bindering, post-sintering or other steps necessary to get a fully functional part. And One Click Metal is working on making that […]

Read More
September 16, 2019
A low-cost, 3D-printed transhumeral prosthesis

To help a patient in his country with a congenital limb deficiency, Buzi Nguyen has designed a 3D-printed transhumeral—above the elbow—prosthesis prototype. The device features 10 degrees of freedom, including independent control of four fingers and a thumb, along with movement capabilities for the wrist and forearm. The prosthesis is powered by a number of […]

Read More
September 16, 2019
Robo-snake slithers across the ground under Arduino control

What has a dozen servos, a WiFi camera, and an Arduino Mega for a brain? Nevon Projects’ snake-bot, of course! This impressive robot uses a total of 12 servos for locomotion and can travel across a variety of surfaces under the control of Android app, or autonomously via a sensor mounted to a smaller servo […]

Read More
September 13, 2019
Whose design even is this? (MPCNC conclusion)

My MPCNC build is coming to an end over a copyright dispute. Twitter thread: https://twitter.com/toms3dp/status/1170306400716804099 💙 Enjoying the videos? Support my work on Patreon! https://www.patreon.com/toms3dp 💙 Buying items through these affiliate links gives me a small kickback without adding any extra costs for you! All details and more links at https://toms3d.org/support-me/ Amazon [🇺🇸 🇩🇪 🇬🇧 […]

Read More

Do you find our blog articles useful?

Show your appreciation, buy us a coffee!

Every little helps, we are always very grateful for donations to keep the lights on!
Make your donation quick and easy via Stripe

Amount: £  

linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram